Hey folks, great that you’re watching! There are lots of ways to chop wood, You can use an axe, you can also use fancy machinery But then there is also this machine: The Mastermilo Machine! Look at what we’ve just build! So far, our design is working! But in this state it isn’t powered… So you can’t call this a machine! It’s hard wo-
Wait… Is that an electromotor? Just chilling? You want to install it, don’t you?
– I like it! Here it is: The woodchopper XXL 2000 Look at this: The log-intake The magic happens right here: The log rolls in… And we have our hammer here Hits and splits the log right there The hammer gets powered by this electromotor! We have an ordinary crank mechanism That moves this tube up and down Turn, turn, turn, turn, The tube slides in there, With a pal here And that… clicks! It holds it in place whilst turning further Look! It takes the hammer It keeps on going… Okay… Look, look! Watch out! Yeah, it opened. Let’s turn on the motor! That was a success! The design and principle has been fully tested It works fine! We have an entire box of logs over there, And we have another pile over here! and the wheelbarrow is filled to the brim and all of that in half an hour work! The safety isn’t installed yet… We have some improvements to make… But it isn’t that bad, we’ve build this in one day! Do you have ideas for project we can build in one day? Leave us a comment below! Do you want to see our entire building process, check out our second channel, the Workshopvlog! Thank you for watching this video, see you next time!