Trailer Wiring Harness Installation – 2005 Kia Sorrento – etrailer.com

Trailer Wiring Harness Installation – 2005 Kia Sorrento – etrailer.com


Today we are going to install part number
118307 on our Kia Sorrento, 2005 model. And we will show you how it plugs in. To install the part, it is a pretty simple
device. There is an actual port for a towing package
on the passengers side frame rail, right here. And all you have got to do, basically, is
just pull off the cap. Push in this little button in and the cap
comes out, and the T-1 connector actually just plugs right back in there. And at this point, you just route the T-1
however you want. Tie off the converter box in a safe location,
and then just run your wires out to your hitch. What looks like a good spot, actually, is
right above the spare tire rack here. So what we will do is just put the wire over
the top of it here. You should have plenty of room for your spare
tire. Let us run our zip tie across the top of it,
through the wires, and I think that will be good. All right, the next thing we are going to
do is run our wire to the other side, here. Just bundle it up and go ahead and just zip
tie it to the top of the hitch here it will be safe and out of the way. Get yourself some extra-long zip ties and
just run it across, maybe one on each side.

Leave a Reply

Your email address will not be published. Required fields are marked *