Tire Sealant and Air Compressor Kit – Available at 1aauto.com

Tire Sealant and Air Compressor Kit – Available at 1aauto.com


Hey guys, have you ever been driving along
and you find on your dash you get a warning light for your low tire pressure? You get out and you find a flat tire. Well here it 1A Auto we have a TruSeal hybrid
inflator. This inflator combines tire sealant, which
is going to seal whatever is causing your tire to lose air and an electric pneumatic
air pump. Now you take the can that comes with the inflator. On the bottom take the cover off, install
the can, slide the cover back on. The first thing you want to do is take your
valve stem cap off and attach this to the actual valve stem. Next you’re going to plug the connector into
your auxiliary outlet and make sure you have your key on auxiliary. Next you are going to want to push down on
this button, twist to the left to add the sealant. You should see sealant going through this
hose, it’s clear and then check your pressure gauge and make sure it goes up. It should go up to about 10 PSI. Next, wherever the leak is on the tire, if
you see a nail coming out, you’re going to want to rotate the tire, so that the leak
is at six o’clock, so straight down. Then what we’re going to do is we’re going
to twist this cap back, and then we’re going to push it down a little bit and go to inflate. We’re going to inflate the tire. You’re going to watch the gauge and go to
your manufacturer’s recommended tire pressure. So there you go. That’s going to get you out of an emergency
situation. Get yours at 1AAuto.com. Thanks for watching. Visit 1AAuto.com, your place for DIY auto
repairs, for great parts, great service, and more content.

Leave a Reply

Your email address will not be published. Required fields are marked *