Kenda Tires and Wheels – Tire with Wheel – AM3S360 Review – etrailer.com

Kenda Tires and Wheels – Tire with Wheel – AM3S360 Review – etrailer.com


Today we’re going to review part number AM3S360. This is a Kenda Loadstar Tire size ST205/75D14
bias trailer tire. It’s mounted on a 14-inch Dexstar Galvanized
Steel Wheel. This wheel has a galvanized finish for superior
corrosion resistance it’s on the front of the wheel and on the back of the wheel. Now we’ll do a few measurements on the wheel,
the diameter which is measured inside to inside, it will be 14 inches. The width on this wheel will be 6 inches wide. This wheel does use a bolt pattern of 5-hole
4-1/2 inch bolt pattern. And on a wheel that has an odd number of bolt
holes like in this case five lugs, there’ll be a couple of ways you can measure the bolt
pattern and I’ll show you both of those. The first way is if you draw a circle through
the center of all five of the lug holes, measure the diameter of that circle that will tell
you the bolt pattern. So in this case if we measure from the center
of this hole to the outer edge of that circle it will be 4-1/2 inches, so that will be a
5-lug 4-1/2 inch bolt pattern. The second way is if you pick one of the lug
holes and measure it from the center of that hole to the center of the lug hole adjacent
to it, either way.

Leave a Reply

Your email address will not be published. Required fields are marked *