Kenda Tires and Wheels – Tire with Wheel – AM3S160 Review – etrailer.com


Today, were going to review part number AM3S160. This is a Kenda Loadstar Tire ST175/80D13,
which is a bias trailer tire, and it is mounted on a 13-inch Dexstar Galvanized Steel Wheel. This wheel has a galvanized finish for superior
corrosion resistance on the front of the wheel and also on the back of the wheel. A few measurements well do on this wheel will
be the rim dimensions. So well do the diameter, which if we measure
inside, to inside will be 13 inches. The width would be 4-1/2 inches wide. This wheel does have a bolt pattern of five
lugs, 4-1/2-inch bolt pattern. And on a bolt pattern that has an odd number
of lugs, like in this case, five on this wheel, there are a couple of ways you can go by measuring
the bolt pattern. First way would be is if you ran a circle,
drew a circle through the center of all five lug holes, and then measure the diameter of
that circle. So if we measured from the center of this
bolt hole to the edge of
that circle, it will be 4-1/2 inches. So
that will tell you its a 5 on 4-1/2.

Leave a Reply

Your email address will not be published. Required fields are marked *