Today we’re going to cover part number AM3H340,
which is the Kenda 205/65-10 bias trailer tire on a 10″ Dexstar galvanized wheel. This wheel is a steel wheel by Dexstar. It includes a galvanized finish for superior
corrosion resistance. A few measurements you’ll need to do taken
on the wheel will be the size of this wheel is 10″ in diameter, which is measured from
inside-to-inside and is a 6″ wide wheel. The bolt pattern on this wheel is 4 lugs and
the distance between the lug is 4″. The best way to measure that is if you measure
from the center of one bolt hole to the center of the other. That will give you a reading of 4″. The wheel capacity is 1,650 pounds. This wheel uses a bolt size of 1/2″-20. The pilot hole diameter, which is very critical,
because this hole will fit over the hub on your trailer, this diameter will measure 2.8″. On to the tire, this is a Kenda Loadstar tire 205/65-10.