Kenda Tires and Wheels – Tire with Wheel – AM30660 Review – etrailer.com

Kenda Tires and Wheels – Tire with Wheel – AM30660 Review – etrailer.com


Today we’re going to review part number AM30660. This is the Kenda 4.80-12 bias trailer tire
mounted on a 12″ Dexstar white spoke wheel. Starting with the rim dimensions, the 12″
diameter would be measured inside-to-inside, which would be from here to here, just 12″. Bolt pattern on this wheel is a 5 bolt 4-1/2″
bolt pattern. And the best way to measure a bolt pattern
that is odd bolt holes is to measure, if you take and draw a circle through the center
of each bolt hole and then measure the diameter of that circle, that will give you the bolt
pattern. So this space we’ll measure from the center
of this bolt hole across toward that other edge of that circle would be, that we drew,
and is 4-1/2″. So this bolt pattern would be a 5 both 4-1/2″
bolt pattern. The weight capacity on this wheel is 1,250
pounds at 90 psi. It uses a wheel bolt size of a 1/2″-20. Another critical measurement would be the
pilot hole diameter. This is the large hole in the center of the
wheel that will go over the hub on your trailer.

Leave a Reply

Your email address will not be published. Required fields are marked *