Kenda Tires and Wheels – Tire with Wheel – AM30110 Review – etrailer.com

Kenda Tires and Wheels – Tire with Wheel – AM30110 Review – etrailer.com


Today, we’re going to be talking about part
number: AM30110 – the Kenda 5.7 X 8 Bias Trailer Tire on 8″ Galvanized Wheel. This wheel has a galvanized finish offering
superior rust-resistance. It measures 8″ in diameter by 3-3/4″ wide. It has a 5 on 4-12″ bolt pattern, and there
are a few ways you can get these dimensions. It has 5 lug holes, and if you draw a circle
through the center of each of the 5 lug holes, and measure the diameter of that circle, you
get your 4-1/2″. You can also measure from the center of one
bolt hole to the center of the very next, giving you 2-5/8″. When you use the chart found on our information
page, you know that that is a 5 on 4-1/2″ bolt pattern. The wheel has a capacity of 910 lbs. and the
bolt holes are 1/2″ X 20″ bolt size. One more piece of information that you’ll
need to know is the pilot diameter. This is the hole in the center of the wheel,
which will go over the hub of the axle.

Leave a Reply

Your email address will not be published. Required fields are marked *