Kenda Tires and Wheels – Tire with Wheel – AM30090 Review – etrailer.com

Kenda Tires and Wheels – Tire with Wheel – AM30090 Review – etrailer.com


Today were going to review part # am30090
and this is the Kenda 570×8 Bias Trailer Tire mounting on an 8-inch Deckstar galvanize wheel. This wheel does have a galvanized fish-finish
for superior corrosion resistance a few measurements on the wheel 8-inch diameter with measure
from center to center to give us the 8-inch diameter. This wheel is 3 in 3 quarter inch supplied. Bolt pattern is a four lug 4-inch full pattern
and the way with measurable pattern in from the center of ball bolt to the center of the
other bolt hole directly across from it which will be 4-inches. This wheel has a weight capacity of 910 pounds
uses a wheel bolt size of a 1/2inchx20. Another critical measurement on this wheel
is the pilot hole diameter which is the large hole the center of the wheel this will go
over the hub on the trailer. Measure that diameter would be 2.8-inches,
now move on to the tire. The tire is a loadstar 570×8. This is a Low Range B tire which is a 4-ply
rated tire has a maximum load capacity of 715 pound at 50psi. The overall diameter of this tire will be
18-inches. And this tire is a bias construction which
will mean the belts from this tire run the length of the tire.

Leave a Reply

Your email address will not be published. Required fields are marked *