Kenda Tires and Wheels – Tire with Wheel – AM30070 Review – etrailer.com

Kenda Tires and Wheels – Tire with Wheel – AM30070 Review – etrailer.com


Today we’ll be reviewing part# AM30070 the
Kenda 4.8×4.0x8 Bias Trailer Tire with 8-inch galvanized wheel. This steel wheel by Deckstar is galvanized
for superior corrosion resistance. It has a ream of dimension 8 inches by 3 in
3 quarter inches wide. It has a 5 on 4 and a half inch bolt pattern
and to get these dimensions you have 5 lug nut holes and when you draw a circle through
the center of each of the lug nut holes you can measure the dimension of that circle which
gives you 4 and a half. You can also measure from the center of 1
bolt hole to the center of the next bolt hole over which is 2.58 inches and by using the
chart on the product page you can determine that when it has 5 bolt holes and that measurement
is 2.58 inches that will give you a 5 on 4 and half inch bolt pattern. This wheel has a capacity of 910 pounds and
a wheel bolt hole size of 1/2inchx20 another crucial measurement is the pilot hole diameter. This is the large hole on the center of the
wheel they will go over the hub of the XM. This wheel pilot hole diameter is 2.8 inches. Now we move on to the tire, this is a loadstar
4.8×4.0x8 size. Has a Low Range C 6-ply rating which will
give you a maximum load of 760 pounds at 90psi. It is a bias construction which means the
belts within the tire run the length of the tire.

Leave a Reply

Your email address will not be published. Required fields are marked *