Give your Tires a Deep, Black Shine that Lasts a Year Long

Hey guys ChrisFix here. After you clean
your car your tires have a dark, shiny, wet look that completes the look of a
freshly cleaned car. After the car dries the tire will turn gray but wouldn’t it be nice to keep it looking
deep black like this? Well actually what you see here is a new
product, by Turtle Wax, called jet black black edura-shine tire coating and in this
video I’m going to show you how to use it and give you my honest product review of it. I got this from turtle wax themselves as
part of their new line of products the jet black line. This uses a black tinted acrylic coating
compared to a silicon-based coating that you find in most tire shine products. The one thing that surprised me the most
is on the box where it says the tire shine will last up to a year. That’s
unheard of. I can’t wait a whole year to publish
this video, but I’ll keep a monthly update in the description below of how the tire product is holding up. Just for a reference, a typical tire shine
last about two months, so a whole year is amazing. So, in the box we have our foam
applicator pad, we have our tire cleaner, which will help you get your tires clean
so that you can apply the tire shine. We have endura-shine tire coat, and we
have some gloves because this stuff will stain your skin. I should also mention where this tire shine is actually made. It’s made in the United States of America which is great. So,
let’s go try this stuff out. We’re going to be working on the front
tire here. Some things that you’ll need that are not in the kit are a water
source, in this case a hose but you could use a spray bottle. Some type of brush or
sponge to rub in the tire cleaning spray, and a towel to clean off any endura-shine
product you get on the rim or a white surface such as the letters or a whitewall. And I should mention you want to apply this product when the
temperature is from 55 to 85 degrees Fahrenheit. So let’s begin. So the first step is to use this jet
black tire cleaner, which is actually really good stuff. You’re going to spray it on the tire to
cover it completely. And you’re gonna let this stuff soak in the tire for about 15 seconds. After it soaks in you’re going to get your sponge, I like using the rough end because it
agitates it really good, and you’re gonna rub in the cleaning spray. And when this turns brown that means
that you’re doing a good job and getting all that dirt out. This stuff works great,
I just cleaned my truck, and these tires are brand new, yet the cleaner got a lot of dirt off the tire. Now you’re gonna want to spray it down with the hose. Make sure you get that stuff off your
rim as well. Now we’re going to let this dry. I’m gonna let it air dry but if you want to
expedite the drying process you could use a towel. Once dry, we’re going to apply the jet
black and dura-shine tire coat. Okay, our tire is nice and dry, now we’re going to take our applicator pad, using the grooved side, and pour the tire coat on
it. And now we just wipe it on. When you go near the white walls, or the white letters in this case, or your rim, you want to be careful not to get this stuff
on it. If you do get the endura-shine on it get a damp, soapy towel right away and rub it off. It says on the box you have 30 minutes to get it off, but it’s really
tough to get off after it sits, so I try to get it off right away. Looks good. After you apply it, let dry for
10 minutes and make a decision if you want to add another layer to make it
darker. So after 10 minutes of drying it looks
really good with just one coat. If you have an older tire, maybe you’ll
need another coat, but this looks really good. I used maybe about five to ten percent of
this bottle to do four truck tires to give you an idea of how much I used. And remember these are large tires. I’m gonna drive around for a week and
let you know how it holds up. After a few hundred miles, some offroading, two rain storms and after cleaning my truck this stuff is holding up really good.
Remember, since I can’t wait a whole year to publish this video, in the description
will be a monthly update on how dark and shiny my tires are, so you’ll know
how well this stuff performs in the long run. Now let’s go over some pros and cons. For the pros: it’s easy to apply, it looks great with a deep black shine, there’s no tire sling. And from what I
could tell so far, and from what the box says, it lasts a
really long time. Way longer than a typical tire shine. For the cons: the tire
coat will stain anything that it gets on including your hands and clothes, and if
it gets on the rim, or a white lettering, or a whitewall of the tire, it can be hard to get off if you don’t
clean it off quickly. But you wanna know what? Those cons are kind of what makes this product
a good product because it really sticks to that tire and it’s really tough to come off. As a final
thought I would definitely recommend this product to a friend. And this is my
new favorite tire shine so I’ll be using this in the future. Hopefully this
video is helpful, if it was remember to give it a thumbs up. If you’re not a
subscriber, consider subscribing. Up on the screen are gonna be a couple of videos, and links to those videos will be in the description below. Also in the description are the links to the
ChrisFix facebook, and twitter pages. Remember, if you have any questions, just
to comment below, and finally if you have any products you want me to review just shoot me a message.

Leave a Reply

Your email address will not be published. Required fields are marked *