Draw-Tite Ball Mount Review – 2010 Chrysler Town and Country – etrailer.com

Draw-Tite Ball Mount Review – 2010 Chrysler Town and Country – etrailer.com


Today on our 2010 Chrysler Town & Country
well be test fitting the Draw-Tite Ball Mount with 3/4-inch Rise or 2-inch Drop rated at
6000 lbs part number 2923. Now before installing our drawbar, well need
to get our hitch height measurement. To do this well measure from the top of the
receiver tube opening to the ground. On this vehicle, that measurement is 13 inches. Now keep in mind, that measurement can vary
due to hitch style, tire size or any other accessory that may change vehicle ride height,
so its a good idea to measure yours first. Now when installing our drawbar well install
it in the drop position first. Well line up the hitch pin hole and install
our hitch pin and secure the pin using the clip. Now our drawbar is secured to the vehicle. From the top of the ball mount platform to
the ground in the drop position is 11 inches. We can now go ahead and flip our drawbar over
to the rise position. Now in the rise position this has a 3/4-inch
rise which will make our measurement from the top of the ball mount platform to the
ground 13-3/4 inches.

Leave a Reply

Your email address will not be published. Required fields are marked *