Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review – 2012 Ford F-250 – etrailer.com

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review – 2012 Ford F-250 – etrailer.com


Today on our 2012 Ford F250 Super Duty we’ll
be test fitting the Convert-A-Ball Cushion Ball Mount for Two Inch Hitches with one inch
rise or two inch drop rated at 14,000 pounds, part number amsc2hd. Now before we begin our test fit we will first
need to obtain the hitch height of our vehicle. This is the measurement from the ground to
the inside top of the receiver tube.We’ll get a measurement of about 21-1/2 inches. This measurement may vary due to tire size,
hitch style or any other aftermarket accessories. Now to begin our test fit, in the drop position
we’ll slide the shank of the ball mount into the opening of the hitch and secure the
ball mount to the hitch with a pin and clip.We’ll now measure from the ground to the top of
the ball platform and we’ll get a measurement of about 20 inches. Now if your hitch height matches the hitch
height of this vehicle and your trailer ride height, which is the measurement from the
ground to the bottom of your trailer’s coupler while your trailer is level, matches
this measurement this will be an appropriate ball mount for you.We’ll now flip the
ball mount over into the rise position and again measure from the ground to the top of
the ball platform and we’ll get a measurement of about 22-1/2 inches.

Leave a Reply

Your email address will not be published. Required fields are marked *