Cervical Neck Traction – Home Cervical Traction – ComforTrac

Cervical Neck Traction – Home Cervical Traction – ComforTrac


Cervical Neck Traction Congratulations on selecting comfort
track the most advanced home cervical traction system available. To begin place the comfort track cervical
traction device on a flat surface such as a carpet or mat. Set the angle of traction as instructed by
your healthcare provider. To change the angle of traction, turn the
unit over then lift and slide the base to the
10, 15, or 20 degree position. Next make sure the neck wedges are
properly spaced as instructed by your healthcare provider. To adjust the neck which is pinch the
adjustable clips located underneath the unit, then slide the neck wedges to the
recommended setting. Make sure you have enough room to
stretch out and that the device is not resting on top of the air pump hose. Also make sure the pump is easily
accessible once lying down. Ensure that the head slide is in the
starting position by pressing and holding the air release button. Lie down on your back placing your neck
between the neck wedges, your shoulders relaxed your head resting
comfortably on the head slide cushion. The neck wedges should comfortably cradle
the neck. Place the forehead strap around your
forehead and adjust for a snug fit. Slide your body down so that the neck
wedges are making firm contact with the back of your head. Once again ensure that the heads slide is
in the starting position by pressing and holding the air release button. Now you’re ready to begin
gradually pumping air into the device. Monitor the hand pump gauge and stop
pumping when the recommended amount of traction force has been attained. The hand pump will hold the pressure
automatically. Comfort track features a high-quality
gauge designed to be extremely accurate. If the traction reading drops it may
have been caused by head movement while repositioning. Slowly pump the device back to
the desired reading then relax. Should you pump the device beyond your
recommended traction force, press the release button until the
correct reading has been attained. After you have reached a recommended
traction force, begin timing your treatment as
prescribed by your healthcare provider. Be sure to lie still and relax during
your treatment time. In case of an emergency, fully depress
and hold the release button until traction is in the neutral position. After the traction is complete, press the release button to reset the
traction back to the neutral position. Release the forehead strap and
relax for a couple of minutes before removing your head from the comfort
track device. You have now completed your treatment. Return the comfort track device to
the custom bag, no disassembly is required. Thank you for
watching this presentation. We hope you enjoy the benefits from the
most advanced cervical traction device available. Home Cervical Traction Available with Free Shipping at NeckSolutions.com Thank You!

Leave a Reply

Your email address will not be published. Required fields are marked *