Okay, we’re ready to put the tires back on.
You’ve got to line up the holes,
set on there. Don’t forget the hub cap. Also, you want to look on the hub cap; there’s a
cut out for the tire valve. Make sure that goes around the valve so if you put air in
the tires, you can get to it. I would start the lug nuts by hand if you are using an air
wrench, especially. Make sure that they’re getting threaded on there correctly, not cross-threading.
You’ve got all four lug nuts started, time to take the impact wrench, just going to snug
each one up, we’re going to go back over them and tighten them for the final time.