Buzz Rack Bike Rack

Buzz Rack Bike Rack


Today we’re showing you how to properly assemble
the Buzz Rack Bicycle Rack from Rage Powersports. Parts for assembly include Cargo Bag, Front
Tube Assembly, Rear Tube Assembly,Outer Side Tubes, Inner Side Tubes, Mounting Brackets,
Wheel Holders, Long Bolts & Spacers, Short Bolts & Spacers, “L” Pins and 2- Pull
Pins Parts needed for Step 1 include Front Tube
Assembly, Outer Side Tubes and 2 Long Bolts and Spacers To begin, Secure the Outer Side Tubes to the
outer mounting holes on the Front Tube Assembly using 2 Long Bolts and Spacers. At this point keep bolts only finger tight. Parts needed for Step 2 include Inner Side
Tubes, 2 Short Bolts and Spacers Mount the Inner Side Tubes to the inner mounting
holes on the Front Tube Assembly using 2 Short Bolts and Spacers. At this point keep bolts only finger tight. Parts needed for Step 3 include Rear Tube
Assembly, 2 Long Bolts, 2 Short Bolts and Spacers Secure the Rear Tube Assembly to the Outer
and Inner Side Tubes using two Long Bolts, Two Short Bolts and Spacers. Tighten all bolts including the bolts from
the previous steps. Parts needed for Step 4 include 2 Wheel Holders To secure the Wheel Holders to the Rear Tube
Assembly, loosen the mounting bracket under the Wheel Holders and attach to the Rear Tube
Assembly. Tighten bolts snugly. Parts needed for Step 5 include Cargo Bag The Cargo Bag easily mounts to the Buzz Rack
frame using three buckles and two Velcro straps. To attach the rear of the Cargo bag, wrap
the rear buckle around the Rear Tube Assembly. Once the clip is attached, pull on the strap
to tighten up any slack. The Velcro straps located on each side of
the Cargo Bag attach to the Outer Side Tubes. The front of the Cargo Bag attaches the same
as the rear. Wrap the two front buckles around the Front Tube Assembly. Once clips are attached,
pull on the straps to remove any slack. Parts needed for Step 6 include Mounting Brackets,
2 Pull Pins, 2 “L” Pins and U-Brackets To attach the Mounting Brackets to the Front
Tube Assembly, slide the mounting bracket under the mounting point on the Front Tube
Assembly. Align the mounting holes and insert the pull pin. Next we need to attach the rear Mounting Brackets
to the Outer Side Tubes. Slide the U-Brackets over the Outer Side Tubes
and align the U-Bracket mounting hole with the center hole on the Mounting Brackets.
Insert the “L” Pin and lock the Mounting Bracket in place. Repeat this process for the next Mounting
Bracket. Thank you for watching this demonstration
video on how to properly assembly the Buzz Rack Bicycle Rack from Rage Powersports

Only registered users can comment.

  1. Hi Vincent, The width of the bike rack is 33.5 inches. Depending on what Thule fairing you have it should work with the Buzz Rack.

  2. HI zeester888,
    If you click the link in the video description it will take you to the product page on our site, where you will find more info and the product dimensions

  3. I have one of these and it works well. Any idea where I can get a second set of attachments so I can use the rack on a second vehicle?

Leave a Reply

Your email address will not be published. Required fields are marked *