Build Your Willys: Front Axle Removal

Build Your Willys: Front Axle Removal


{rtf1ansiansicpg1252cocoartf1138cocoasubrtf230
{fonttblf0fswissfcharset0 ArialMT;f1fswissfcharset0 Helvetica;}
{colortbl;red255green255blue255;red35green35blue30;} margl1440margr1440vieww10200viewh8400viewkind0
pardtx720tx1440tx2160tx2880tx3600tx4320tx5040tx5760tx6480tx7200tx7920tx8640pardirnatural f0fs24 cf2 First, remove the cotter pin
& washer from the shock mount plate and shackle assembly. Next, disconnect the shock absorber
from both the shackle and mounting plate assembly. Repeat this process on the opposing side.
Remove the four attaching nuts and “U” bolts to release the cf0 front drivers side torque
reaction spring assemblycf2 . Next, f1 cf0 remove the
f0 cf2 leaf spring pivot eye & shackle Bolt. Disconnect the leaf spring from the shackle
brackets. Unscrew the leaf spring shackle and remove the leaf spring. After detaching
the “U” bolts from the shock mount plate assembly, r
f1 cf0 emove the f0 cf2 leaf spring pivot eye & shackle bolt
and disconnect the leaf spring from the shackle brackets. Finally, when pulling the front
axle from the frame, please use the safest method available. The front axle is very heavy
and caution must be taken to avoid injury.}

Only registered users can comment.

Leave a Reply

Your email address will not be published. Required fields are marked *