1997-2017 F150 ShurTrax Traction Water Weight 400 lb. w/o Field Repair Kit Review & Install

1997-2017 F150 ShurTrax Traction Water Weight 400 lb. w/o Field Repair Kit Review & Install


Hey, guys. Alex from americanmuscle.com, and today I’m
bringing my quick review and breakdown of the ShurTrax 400-pound water weight without
field repair kit fitting your 1997 through current F-150. So, in this video, I’m gonna talk about who
this kit’s going to appeal to, the construction and materials that went into this water weight,
what you should expect to be spending, and then what it’s gonna take to get this installed,
even if we can call it that. Where I’m gonna be giving this an incredibly
easy one out of three wrenches on the difficulty meter and less than 15 minutes to get this
strapped down, and I’ll have a little bit more for you on that later. So, as a truck owner that’s typically running
around town in two-wheel-drive, I can personally attest to the fact that every now and then
I usually experience a little bit of wheel hop. Be it either getting off the line, trying
to get out in traffic a little bit faster than I need to usually or just when it’s wet
out, especially the fact that my rear end has just a little bit of a tendency to slip
out where it doesn’t belong. So this can not only be dangerous when you’re
driving around. But it’s just downright disconcerting in the
event that you do get off the line a little bit faster than usual or get out of somebody’s
way as by having no traction in the back where your bed is, it’s just not a good thing to
have. So not only would this be beneficial year-round
but especially when the weather starts to take a turn for the worse. You’re gonna notice that your truck is gonna
be losing that much more traction and sliding around a little bit. And even for the truck owners out there that
are running a larger tire, it’s just gonna be that much more apparent. So the team over at ShurTrax definitely saw
that there was a void in the aftermarket community for something like this and brought this to
market for the truck owner that doesn’t have access or owns a front-end loader. Especially for somebody that doesn’t wanna
fill their bed with cement, sand, blocks, anything that you would be throwing in there
to weigh down your truck. So this is not only going to appeal to truck
owners that typically aren’t utilizing their bed or have it filled with anything but for
the owner out there that lives in parts of the country where you need that extra weight
in the rear end of your truck simply just to get around town safely. In terms of the construction and materials
here, ShurTrax is gonna have this manufactured out of a vinyl-like material which is then
gonna feature two separate pods inside of this pack itself which is gonna be able to
accommodate up to 400 pounds of water. So a couple things that I definitely like
about this kit is that ShurTrax is gonna have internal baffles die-electronically welded
in here which essentially means that the water is gonna be staying in one compartment or
another. So that when you’re pushing your truck through
turns you’re not gonna have that weight shifting around in your truck and throwing it off track. Additionally, this is gonna be a low profile
design. So if you’re still looking to utilize your
bed, you will have the ability to put stuff on top of it. But the general rule of thumb I might throw
a piece of plywood back there just to make sure that nothing’s going to puncture this. So in terms of the pricing here you should
expect to be spending only about 150 bucks for this kit which, in my opinion, is definitely
very budget-friendly considering this is going to be giving your truck a much-needed dose
of traction. And especially if you’re living in parts of
the country in which you’re seeing inclement weather more often than not, I honestly think
this is just gonna be a no-brainer for you. So in terms of the installation, for lack
of a better term, just like I had said up top, you’re looking at an incredibly easy
one out of three wrenches on the difficulty meter and about 5 to 10 minutes to get this
filled. Now you’re really only gonna be looking at
using this Universal spout adapter right here, plugging it right in and attaching it to any
water access you can find. When you’re not using it, it’s gonna fill
out that much easier. You can fold it up, throw it under your seat
when you don’t need to use it. You’re good to go. So just to wrap things up here, some final
thoughts. If you’re the truck owner that’s hunting for
a little bit more traction, you’re not really too into the idea of filling your bed with
bricks, concrete, sand bags, you name it. This is gonna be a great option for you to
keep your truck on the ground, on the road where it belongs. So that’s my quick review and breakdown of
the ShurTrax 400-pound water weight without field repair kit fitting your 1997 through
current F-150 available right here at americanmuscle.com.

Leave a Reply

Your email address will not be published. Required fields are marked *